• aluminum 5052 perforated panelsc

    Why 5052 Aluminum Is So Popular With Our Customers

    07.21.2020

    5052 aluminum is popular because it is one of the most versatile aluminum?alloys. It is strong enough for fuel tanks, but adaptable enough for utensils.?Why?is 5052 such a popular choice with our?customers??Here’s?the in-depth answer.?

    A General?Introduction?to 5052 Aluminum?

    Among 5052 aluminum’s benefits are good weldability, very good resistance to corrosion, and high fatigue strength. Because the benefits are so varied, you see 5052 in a range of applications: it shows up in marine environments because of its resistance to corrosion, in architecture exposed to high vibration because of its high fatigue strength, and?in pressure vessels and containers because of its good weldability.??

    But?the benefits don’t stop there.?Aluminum 5052?also happens to be the?strongest non-heat-treatable sheet and plate in common use.?5052 isn’t just easily welded and highly corrosion-resistant, it is also tough and strong. It has good drawing properties and a high rate of work hardening. Its overall versatility, not to mention excellent value, makes it one of the most serviceable alloys available.??

    aluminum 5052 perforated panelsc

    What Are?The?Applications of 5052 Aluminum??

    Marine Applications?

    Along with a few other 5000 series alloys, 5052 is corrosion resistant against seawater and salt spray. Its corrosion resistance means it can be used for large marine structures that are sensitive to failure, like the tanks of natural gas tankers. This is why you see 5052 aluminum on boats in general.?

    Architecture?

    You’ll frequently see 5052 alloy in architectural facades.??

    Home & Office?

    You often see 5052 alloy aluminum in kitchen cabinets, appliances, fans and fan blades, home freezers, clock plates,?fencing, and more.?

    Transportation?

    5052 alloy aluminum has made its way into aircraft, bus, and truck manufacturing, road and name signs, fuel lines and tanks,?streetlights,?and other hallmarks of the transportation industry.?

    Manufacturing?

    5052 aluminum is frequently used for general sheet metal work, heat exchangers, flooring panels,?rivets and wires, chemical drums?and other equipment,?pressure vessels, treadplate, containers, and more.?

    How Strong is 5052 Aluminum??

    In general, the strength of metal is measured by factoring both yield strength and tensile strength?together.?While yield strength considers the strength of the metal’s shape by measuring the point at which it deforms, tensile strength (or ultimate strength) measures how much a metal will stretch before it breaks. The strength of 5052 also depends on temper. See the following chart for a breakdown of the strength of the alloy.?

    What are the Typical Mechanical Properties of 5052 & Its Tempers?

    ?Strength Psi??Elongation %??

    ?

    Alloy & Temper?Ultimate?Yield Set 0.2%?1/16”??”?Brinell Hardness?
    5052-0?28,000?13,000?25?30?47?
    5052-H3233,00028,000121860?
    5052-H34?38,000?31,000?10?14?68?
    5052-H36?40,000?35,000?8?10?73?
    5052-H38?42,000?37,000?7?8?77?

    Note: The?Above properties are typical. For min/max data by temper refer to Aluminum Standards and Data from the Aluminum Association.?

    Is 5052 Aluminum Heat Treatable??

    A key distinction of?5052 aluminum?is that it is a non-heat treatable alloy, meaning that it is strengthened through cold working?or strain-hardening, for example rolling or forging.?The degree of strain hardening is indicated by temper designations. For example,?H12 and H18 tempers represent one-quarter hard and full hard, respectively.?

    5052, like other non-heat-treatable alloys,?contains alloying?constituents?that?remain substantially in solid solution or are insoluble at all temperatures.?Other non-heat-treatable alloys with high purity aluminum can be found?in the 1,000, 3,000, and 5,000 series.??

    Strain-hardened material is returned to the full soft condition by heating above the annealing point with controlled cooling. Partial annealing, accompanied by some loss of strength will occur at 300-400°F.?

    Can You Bend 5052 Aluminum??

    Aluminum alloy 5052 is a good candidate for bending.?While the elongation isn’t as high as the?3003 aluminum?alloy, you still see a big difference between yield and tensile strength. And you will see high strength compared to other?non-heat-treatable grades, not to mention 5052’s excellent?corrosion resistance.?Once you anneal 5052 aluminum, you can beat even the 3003 alloy when it comes to affordability. ?

    What Is?The?Chemical Composition of 5052 Aluminum??

    5052 aluminum is part of the 5000 series of aluminum. Grades in this family are alloyed using 2.5% magnesium and .25% chromium. Here is a full breakdown of 5052 aluminum’s chemical composition.?

    Alloy?Si?Fe?Cu?Mn?Mg?Cr?Zn?Ti?
    5052?0.45 Si/Fe?0.0?0.1?0.1?2.2/2.8?0.15/0.35?0.1??0.0

     

    What Is The?Difference Between 5052 and 6061 Aluminum??

    Kloeckner Metals also stock 6061 aluminum?and, as one of the most common grades of aluminum sheet, we frequently get asked about the difference between 5052 and 6061 aluminum. The main difference between 5052 and 6061 aluminum is that 6061 is a heat-treatable alloy and therefore stronger than 5052 aluminum.?6061 also features high resistance to stress combined with good formability and weldability. Because of its higher strength and lower?formability, you see 6061 in more structural and engineering applications.?Depending on your needs, we may recommend 6061 aluminum to you.?

    Kloeckner is proud to?be one of the only aluminum distributors in North America to stock higher-grade products, including sheet, plate, bar, and tube, alongside custom extrusion products. If you’d like to learn more about aluminum 5052 and understand if it would fit your needs,?please email?kmc-nonferrous@kloecknermetals.com?and one of our experts will be on hand to guide you.?

    Natalie Spira
    Natalie Spira is Kloeckner's Marketing Communications Manager. Previously, she was the CEO and Founder of Fraction Marketing, a marketing agency catering to ecommerce startups. Natalie holds a MBA from Tel Aviv University with concentrations in entrepreneurship and marketing and a BA in English from UCLA.
    aluminum 5052 perforated panelsc
    Recent News Posts
    09.15.2020

    What is Structural Steel Fabrication? Structural fabrication refers to the...

    09.08.2020

    We’re proud this week to shine a light on James...

    09.01.2020

    Aluminum alloys are known for their corrosion resistance, ductility, conductivity,...

    More posts
    Subscribe To Our Blog

    Get a quote

    quote

    X

    Outdated or Unsupported Browser Detected

    The Kloeckner Metals website uses modern technologies. Unfortunately, your browser doesn't support those technologies.

    Download the latest version of one of these browsers to experience the site:

    Do Not Remind Me Later
    最新亚洲AV日韩AV欧美AV